Energia

Trust, Quality, Excellence

Welding Machine Rentals

Welding Machine Rentals – Energia
GX200 2+4

Top Features

  • DC CC 4kW
  • Fuel Efficient, Low Noise Level
  • 4000 Watt AC Generator
  • Available with Electric Start
  • 11 HP GX340 engine, models with serial numbers up to 11627
  • 13 HP GX390 engine, models with serial numbers past 11627
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Flux-Cored (FCAW)

Exceptionally smooth output from the brushless, asynchronous alternator provides excellent welding characteristics and arc striking voltage. Lightweight and portable with auxiliary power available while welding.

Miller Bobcat 250

Top Features

  • AC DC CC CV 11kW
  • 9,500 Watts Continuous Power
  • Quieter, Smaller, Lighter Design
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, lux-Cored (FCAW)

Rugged welder/generator is great for Stick and Flux-Cored welding and designed for maintenance/repair operations, construction, farm, ranch and generator use.

GX300

Top Features

  • DC CC CV 10kW
  • 305 amps DC Output at 100% Duty Cycle
  • 22 HP Kohler Command CH22 Gasoline Engine
  • DC Stick, CV Wire and DC Pipe Welding with E6010
  • 10,000 Watts 120/240 Volt AC Auxiliary Power
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

Chopper technology for the best welding arc available on the market. Full range output control in both CC and CV modes with arc force control in CC mode and inductance control in CV mode. MS-style connections for remote amperage control and wire feeders.

Lincoln Ranger 305 G

Top Features

  • DC CC CV 10.5kW
  • Kohler Gasoline Engine – 23 HP Carburetor
  • Digital Weld Meters
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Flux-Cored (FCAW)

Make the Ranger 305 G your portable welding station – general stick and downhill pipe, Touch Start TIG, MIG, and flux-cored wire capability. The 9,500 watt continuous single-phase AC generator powers motors starting, tools and inverter welders for extended range and process capability.

Miller Trailblazer 325

Top Features

  • DC CC CV 12kW
  • Unbeatable Arc Performance
  • Auto-Speed – Matches engine speed to load
  • 12,000 Watts Peak, 10,500 Watts Continuous 120 VAC Power
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

No other compact machine in the 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less noise – for productive, profitable, quieter jobsites.

GX271 LPG

Top Features

  • DC CC CV 9kW
  • Kohler Command CH-20 LPG engine
  • 275 Amps DC at 100% Duty Cycle
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Plasma Arc Cutting, Flux-Cored (FCAW)

The GX271 LPG has the same welding and auxiliary power features as the GX271 gasoline version, but comes with a Kohler Command CH-20 LPG engine and includes a shop-type, three-wheel undercarriage complete with LPG cylinder holder.

Miller Bobcat 250 LPG

Top Features

  • AC DC CC CV 11kW
  • 9,500 Watts Continuous Power
  • Tri-Cor Technology
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

Reliable Bobcat engine-driven welding generators are the industry standard for quality and value. Multiprocess weld output, strong generator power, and most important — rated #1 in reliability, make the Bobcat the welding industry’s most popular choice.

Miller Trailblazer 275 LPG

Top Features

  • DC CC CV 11kW
  • Three Stick and TIG Modes for Optimized Arc Performance
  • Two Wire Modes for Simplified Setup
  • Infinite Arc Control in Stick and Solid Wire Modes
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

Designed for the professional welder, the Trailblazer welder/generator delivers unbeatable arc performance in all weld processes, providing the smoothest, most stable arc in the industry.

Lincoln Ranger 305 LPG

Top Features

  • DC CC CV 10kW
  • Kohler Overhead Valve 25 HP Command LPG Engine
  • Digital Weld Meters
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Flux-Cored (FCAW)

The Ranger 305 LPG is designed for environments where gasoline and diesel emissions are not acceptable. The 10,000-watt peak single-phase AC generator powers motor starting, tools and inverter welders for extended range and process capability.

D300K 3+3

Top Features

  • DC CC 3kW
  • Five Output Taps and Fine Current Control
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Fuel Efficient V2003BG Kubota Diesel Engine
  • 3,000 Watts AC Auxiliary Power
  • Processes: Stick (SMAW), Air Carbon Arc Cutting, Plasma Arc Cutting, Flux-Cored (FCAW)

The pure DC generator with all copper coils provides excellent welding characteristics. The welder’s choice for pipeline welding and general construction work. Constant speed engine for instant arc starting. The V2003BG Kubota diesel engine provides reliable, efficient operation in even the most severe conditions.

D300K 3+3SE

Top Features

  • DC CC 3kW
  • Fuel Efficient Industrial Diesel Engine
  • Pure DC Generator Welding Output
  • All Copper Windings
  • Five Current Ranges with Overlap
  • 300 Amps Output @ 60% Duty Cycle

The pure DC generator with all copper coils provides excellent welding characteristics. The welder’s choice for pipeline welding and general construction work. Constant speed engine for instant arc starting. The Kubota D1503 (Tier 4) diesel engine provides reliable, efficient operation in even the most severe conditions.

D302K 3+12

Top Features

  • DC CC CV 12kW
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Kubota V1505-E2BG1, Tier 2, 20.2 HP Liquid-Cooled Diesel Engine
  • 12,000 Watts Peak, 10,000 Watts Continuous 120/240 VAC Power
  • Low Noise Level – 74 dba at 13 ft (94 Lwa) at maximum output

The 3+12 is a constant current/constant voltage, DC diesel engine-driven welder with a high-efficiency, three-phase welding generator that requires less fuel but has enough power for gouging with up to 1/4″ carbons.

Miller Trailblazer 325

Top Features

  • DC CC CV 12kW
  • 12,000 Watts Peak, 10,000 Watts Continuous 120 VAC Power
  • Excel Power (Optional) – 2400 watts, 20 A at 120 V, 60 Hz at Idle Speed and While Welding
  • Kubota D902, 24.8 HP Liquid-Cooled Diesel Engine
  • Low Noise Level – 75 dBA at 23 ft (100 Lwa) at 150 A Load
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Plasma Arc Cutting, Flux-Cored (FCAW)

Trailblazer welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive technologies – Auto-Speed and optional Excel power – deliver superior runtimes, increased fuel efficiency, and improved welder/generator performance

DX350

Top Features

  • DC CC CV 12,500 watts
  • Kubota V1505 EPA Tier 4 Diesel Engine
  • Five Welding Process Modes
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The quiet, compact Red-D-Arc DX350 is an ideal choice for construction teams, pipe rig owners and rental fleet managers

DX450 Diesel Engine Welder

Top Features

  • Portable DC CC CV Welding
  • Optional Sidewinder Package to Function as a Dual-Operator Welder
  • V2403M EPA Tier 4i, liquid-cooled, four-cylinder Kubota Diesel Engine
  • 19 kW 3-Phase 240 VAC Auxiliary Power
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

One of the most compact and quiet 450 Amp engine-driven welders available on the market. Chopper Technology delivers superior welding-arc performance in all welding modes. VRD (Voltage Reduction Device) reduces the OCV in CC Stick mode for added safety.

D502K 5+4

Top Features

  • Portable DC CC CV Welding
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Kubota V3300-B 49 HP Liquid-Cooled Diesel Engine
  • 5,500 Watts Peak, 4,000 Watts Continuous 120/240 VAC Auxiliary Power
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to 3/8″ carbons. A simplified control panel with a five position range switch and a fine-control potentiometer provides easy process set-up.

D502K 5+20

Top Features

  • Portable DC CC CV Welding
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Kubota V3300-B 49 HP Liquid-Cooled Diesel Engine
  • 20,000 Watts of 3-Phase 240 VAC Auxiliary Power
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The three phase rotating field generator produces a constant DC weld output and has enough power for gouging carbons of up to 3/8″ . Easy to use control panel with a 5 position range switch and a fine control potentiometer expedites process set-up and switching.

D550K HO

Top Features

  • Portable DC CC CV Welding
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Kubota V3300-B 49 HP Liquid-Cooled Diesel Engine
  • 20,000 Watts of 3-Phase 240 VAC Auxiliary Power
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to 3/8″ carbons. A simplified control panel with a five position range switch and a fine control potentiometer provides easy process set-up.

D550K TIG Welder

Top Features

  • Portable DC CC CV TIG Welder with an added AC output kit
  • Allows for portable heavy aluminum AC TIG welding in the field
  • Add High Frequency Unit and Water Cooler Unit if required
  • Up to 20,000 Watts of Three-Phase 240 VAC Auxiliary Power
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The 3 phase rotating field generator delivers a smooth DC weld output and has enough power for gouging with up to 3/8″ carbons. A simplified control panel with a five position range switch and a fine control potentiometer allows for easy set-up.

Big Blue Air Pak CC/CV DC 5.5 kW

Top Features

  • Portable DC CC CV Welding
  • 5,500 Watts Peak, 4,000 Watts Continuous
  • Plasma Cutting 3/8″ Thick Material with Optional Plasma Cutter
  • Heavy Industrial Applications
  • Processes: Stick (SMAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW) , Stud Welding

Welder/generator/air compressor – One machine that will do it all. Designed and built to be the most reliable high-output system in the world.

Miller Big Blue Air Pak (Deluxe) CC/CV AC/DC 20 kW

Top Features

  • Portable DC CC CV Welding With an Added AC Output Kit
  • Up to 20,000 Watts of Three-Phase 240 VAC Auxiliary Power
  • Allows for Heavy Aluminum AC TIG Welding in the Field
  • Plasma Cutting 1″ Thick Material with Optional Plasma Cutter
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW) , Stud Welding

Welder/generator/air compressor – Rent one machine that will do it all. This deluxe model welding machine is designed and built to be the most reliable high-output system in the world.

ES275i

Top Features

  • DC CC
  • Touch-Start TIG Allows DC TIG Welding Without High-Frequency Starting
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Available in 4Pak and 8Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), Air Carbon Arc Cutting

275 amp @ 35% duty cycle, constant current, DC, inverter welder with both single- and three-phase, 50/60 Hz voltage input. Outstanding E6010 and E7018 performance using up to 7/32” diameter electrodes that enables both whip or drag techniques.

E500

Top Features

  • DC CC 2kW
  • Rugged Tubular Pak-Lok-Frame
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Arc Force Control and Continuous Current Control
  • Full Range Remote Current Control
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The choice for industrial applications offering a smooth, consistent arc and enough amperage for air carbon arc gouging with up to 3/8″ diameter carbons. Ideal arc characteristics for critical welding such as low hydrogen and stainless steel electrodes. Superior all-position stability makes code quality welds and clear x-rays easier to attain.

Miller XMT 350 FieldPro

Top Features

  • DC CC CV
  • Miller ArcReach Technology
  • Cable Length Compensation (CLC)
  • Adjust While Welding (AWW)
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Air Carbon Arc Cutting, Flux-Cored (FCAW) , RMD

Miller ArcReach welding technology minimizes downtime spent walking to and from the power source and maximizes arc-on time, weld quality and jobsite safety.

EXtreme360

Top Features

  • DC CC CV
  • 350 Amps at 60% Duty-Cycle Output
  • Adjustable Arc Control
  • Available in 4Pak and 8Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Flux-Cored (FCAW)

The EXtreme360 is a 350 amp at 60% duty cycle, constant current/constant voltage, DC inverter welder.Standard features include Auto-Line, Ammeter and Voltmeter, adjustable Arc Control, full Remote Control capability and Extreme-Duty construction

FX360XL w/CrossLinc

Top Features

  • DC CC CV
  • CrossLinc Technology – Full Functionality Without Control Cables
  • Compatible With LN25 Across-the-Arc and LN25X CrossLinc Feeders
  • Available in 4Pak, 6Pak and 8Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

A rugged, easy to setup and easy to operate multi-process power source for maximum flexibility. CrossLinc technology sends voltage information hundreds of feet using a standard weld cable.

DC400

Top Features

  • DC CC CV 2kW
  • Rugged Tubular Pak-Lok-Frame
  • 400 amps DC at 36 volts and 100% Duty Cycle
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Arc Force, Pinch, Continuous Output Control
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multiprocess, Submerged Arc (SAW), Air Carbon Arc Cutting

With true multiprocess capabilities, the DC400 provides outstanding arc characteristics for both constant current and constant voltage applications. Full arc control with MS-style remote control connections. Can also be configured as a 4Pak or 6Pak Multioperator System.

FX450

Top Features

  • DC CC CV
  • Multi-Process Capability
  • Variable Arc Control, Multi-Voltage Input
  • Full-Featured Remote Control Capability
  • IP23 Rating for Outdoor Operation and Storage
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multiprocess, Air Carbon Arc Cutting, Flux-Cored (FCAW)

This multiprocess welder delivers up to 500 amps of welding power for a variety of applications, including construction and fabrication. It features an IP23 rating for outdoor operation and storage, and the latest inverter technology will save you real dollars on the utility costs associated with your welding operations.

Miller XMT 450

Top Features

  • DC CC CV
  • Adaptive Hot Start
  • Infinite Arc Control
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

Portability and excellent arc performance make the XMT family the most popular in the industry. With multi-process capabilities and more welding output, the XMT 450 is versatile for applications from jobsites to the factory floor.

DC600

Top Features

  • DC CC CV 2kW
  • Rugged Tubular Pak-Lok-Frame
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Full Range Output Control, Standard Ammeter and Voltmeter
  • 600 amps DC at 44 volts and 100% Duty Cycle
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multiprocess, Submerged Arc (SAW), Air Carbon Arc Cutting

Designed for GMAW (MIG), FCAW and submerged arc welding, and stick and air carbon arc gouging with up to 3/8″ diameter electrodes. Includes standard terminal strip for wire feeders and remote control.

FX650

Top Features

  • DC CC CV
  • Voltage Reduction Device – Reduces OCV When Not Welding
  • 15/20A GFCI 115V, 15A Auxiliary Power
  • Welding Outputs are Rated for Extreme Temperature Operation
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The FX650 is a multi-process welder that is easy to set up and easy to operate, but rugged and versatile enough for construction, fabrication, shipbuilding and other heavy-duty applications.

FX650XL w/CrossLinc

Top Features

  • DC CC CV
  • CrossLinc Technology – Full Functionality Without Control Cables
  • Compatible With LN25 Across-the-Arc and LN25X CrossLinc Feeders
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The FX650XL is a heavy-duty, versatile multi-process welder that is easy to set up and easy to operate. CrossLinc technology sends voltage information hundreds of feet using a standard weld cable, providing full control of your system without the need for control cables.

DC1000

Top Features

  • DC CC CV
  • 1000 amps DC at 44 volts and 100% Duty Cycle
  • Rugged Tubular Pak-Lok-Frame
  • Full Range Output Control
  • Standard Ammeter and Voltmeter
  • Processes: Stick (SMAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

Designed for GMAW (MIG), FCAW and submerged arc welding, and stick and air carbon arc gouging with up to 5/8″ diameter electrodes. Includes standard terminal strip for wire feeders and remote controls.

Lincoln Idealarc DC1500

Top Features

  • DC CC CV
  • Multi-process DC arc welding power source
  • Outstanding welding performance
  • Various Sub-Arc Tractor and Automatic Wire feeder Packages Available

The DC1500 is a multi-process DC arc welding power source for automatic welding applications. It produces outstanding arc characteristics on both constant voltage and constant current processes delivering great welding versatility in a single power-source.

PipeWorx 350 FieldPro System

Top Features

  • DC CC CV
  • Simplified Cable Management
  • Complete Control at the Weld Joint
  • Arc Performance Optimized for Critical Pipe Welding
  • New Durability Standard for Field Construction
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Air Carbon Arc Cutting, Flux-Cored (FCAW)

Delivers excellent RMD and Pulse MIG, MIG and Flux-Cored welding up to 200 feet from the power source without control cables. Automatically shifts all controls to the Smart Feeder including weld process selection, gas type, material type and wire diameter, wire feed speed and voltage.

PipeWorx 400 Welding System

Top Features

  • DC CC CV
  • Designed Exclusively for Pipe Fabrication Shops
  • Quick Process Changeover
  • Simple and Easy to Operate
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Air Carbon Arc Cutting, Flux-Cored (FCAW)

Simplified and optimized for pipe fabrication shop welding, the PipeWorx systems streamlined set-up with one touch welding, quick process changeover, and Pulsed and Modified Short-Arc MIG processes, makes training and turn-around times faster than ever before.

Miller XMT 350 MPa

Top Features

  • DC CC CV
  • Profile Pulse – TIG Appearance with MIG Simplicity
  • Auto-Line Input Power Management
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Air Carbon Arc Cutting, Flux-Cored (FCAW)

The XMT 350 MPa is portable and versatile for applications from jobsites to the factory floor. Built-in pulse programs for manufacturing and fabrication applications that have benefits for standard steels, high-strength steels and aluminum.

Lincoln Power Wave S350

Top Features

  • Power Connect Technology
  • Tribrid Power Module
  • CheckPoint – Cloud-Based Data Collection Tool
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Flux-Cored (FCAW)

Power Wave S350 includes Lincoln Electric’s performance technology inside and out to ensure optimized performance on almost any application.

Lincoln Power Wave 355M

Top Features

  • DC CC CV
  • Superior Arc Performance
  • Revolutionary Communication
  • Lincoln Waveform Control Technology
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Advanced Process, Flux-Cored (FCAW)

The Power Wave 355M features some of the best performance technologies and processes all rolled into one highly efficient inverter power source designed for high-end semiautomatic welding.

EXtreme 360 MAP

Top Features

  • DC CC CV
  • Advanced Arc Control
  • SharpArc Provides More Control
  • Stable Arc at Low Arc Lengths
  • Reduced Heat Input
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Advanced Process

The EX360 MIG Advanced Pulse welder is designed to handle virtually any welding job, including those hard-to-weld alloys found at power generation plants and shipbuilding facilities

Miller XMT 450 MPa

Top Features

  • DC CC CV
  • Adaptive Hot Start
  • Infinite Arc Control
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Air Carbon Arc Cutting, Flux-Cored (FCAW)

Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 450 MPa includes built-in pulse programs for manufacturing and fabrication applications that have benefits for standard steels, high-strength steels and aluminum.

Lincoln Power Wave 455M

Top Features

  • DC CC CV
  • Digital Communications Technology
  • Waveform Control Technology
  • Patented Pulse-On-Pulse, Power Mode Processes
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Advanced Process

Waveform Control Technology gives you the ability to select the right waveform for each application enabling processes like Pulse-On-Pulse and Power Mode. Choose from over 60 standard welding waveform patterns that offer a broad range of electrode size, type and shielding gas combinations to give you optimal appearance, penetration, beadshape and travelspeed for each application.

Lincoln Power Wave 455M/STT

Top Features

  • STT DC CC CV
  • Surface Tension Transfer (STT) Process
  • Digital Communications Technology
  • Waveform Control Technology
  • Patented Pulse-On-Pulse, Power Mode Processes
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Advanced Process, Flux-Cored (FCAW) , Surface Tension Transfer

Waveform Control Technology gives you the ability to select the right waveform for each application enabling processes like Pulse-On-Pulse and Power Mode. Choose from over 60 standard welding waveform patterns that offer a broad range of electrode size, type and shielding gas combinations to give you optimal appearance, penetration, beadshape and travelspeed for each application.

Lincoln Power Wave S500

Top Features

  • PowerConnect – Automatically Adjusts to Input Power
  • Tribrid Power Module – Exceptional Welding Performance with High Power factor and Efficiency
  • CheckPoint – Cloud Based System To View or Analyze Welding Data
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Flux-Cored (FCAW)

The multi-process Power Wave S500 is packed with Lincoln Electric performance technology for welding on thicker materials. It provides an extremely fast arc response, includes over 65 standard welding waveforms for optimized performance on almost any application and efficiently converts input power to reduce operational costs.

Lincoln Power Wave AC/DC 1000

Top Features

  • AC DC CC CV
  • Digital Communications Technology
  • Waveform Control Submerged Arc Welding
  • Increased Weld Speeds, Higher Quality Welds
  • Single and Multi-Arc Capability
  • Processes: Advanced Process, Submerged Arc (SAW)

Eliminate downtime with easy polarity switching – no hardware reconfiguration required. Stable and independent arc controls for multiple arc applications. Improved efficiency with cooler operation through patented Coaxial Transformer Technology. Remote process monitoring through ArcLink, Ethernet and DeviceNet communication. Consistent operation over +/- 10% input voltage variation through built-in line voltage compensation and reliable input-voltage connection.

Mark VIII-2

Top Features

  • Multioperator welding system
  • Drives eight modules from a single main transformer
  • Each welding module features remote control
  • Wide range of amperage settings
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

Control capabilities, and a wide range of amperage settings. Modules can be easily paralleled for extra welding power. The Mark VIII®-2 operates 24 hours a day with exceptional productivity and durability. Housed in a rugged steel enclosure, this performer has repeatedly proven its ability to withstand the punishment of the worst weather and construction site elements.

ES275i Multi-Operator Paks

Top Features

  • Built to Red-D-Arc Extreme-Duty Specifications
  • Available in 4Pak and 8Pak Configurations
  • Touch-Start TIG allows DC TIG welding without high-frequency starting
  • Processes: Stick (SMAW), TIG (GTAW), Multioperator, Air Carbon Arc Cutting

275 amp @ 35% duty cycle, constant current, DC, inverter welder with both single- and three-phase, 50/60 Hz voltage input. Outstanding E6010 and E7018 performance using up to 7/32” diameter electrodes that enables both whip or drag techniques.

E300 Multi-Operator Paks

Top Features

  • Rugged Tubular Pak-Lok-Frame
  • Excellent Performance and Versatility
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multioperator, Flux-Cored (FCAW)

Multi Welder Paks for stick welding with all types of electrodes up to 3/16″ including low hydrogen, stainless steel, hardfacing, aluminum and bronze. Also scratch start DC TIG, and MIG or flux-cored welding with voltage sensing wire feeders. Includes a built-in stabilizer for outstanding arc stability and pop-out-resistant welding with all DC electrodes.

E300 3+2 Multi-Operator Paks

Top Features

  • 2,000 Watts, 115 VAC Auxiliary Power per Module
  • Available in 4Pak and 6Pak Configurations
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Arc Force, Hot Start, Continuous Output Control
  • Full Remote Control Capabilities
  • Processes: Stick (SMAW), MIG (GMAW), Multiprocess, Multioperator, Air Carbon Arc Cutting, Flux-Cored (FCAW)

The highly efficient design of the E300 3+2 permits the 4Pak version to be operated with a 60 amp service and the 6Pak version from a 100 amp service with either 460V or 575V 3 phase power. With up to 350 amps of DC welding current, full welding output controls, 115 VAC auxiliary power for tools, compact size, and multi-process capability, these Paks are the ideal choice for multiple operator use.

EX300 Multi-Operator Paks

Top Features

  • Compact, Highly Portable Inverter Design
  • Arc Force Control, Adaptive Hot Start
  • Digital Meters for Preset Welding Output
  • Lift-Arc for TIG Starts, Process Selector Switch
  • Available in 4Pak and 8Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Multiprocess, Multioperator

Available in 4Pak, 6Pak and 8Pak configurations, these multioperator welders are easily maneuvered around most jobsites when mounted on the optional wheel kit. Excellent stick welding performance with up to 400 DC amps per arc combined with the features of a high-end MIG machine make this a very versatile system.

EX350i Multioperator Paks

Top Features

  • 350 Amps Output at 34 Volts, 60% Duty Cycle
  • Variable Hot Start and Arc Force Control
  • Inductance (Pinch) Control
  • 2 CC Modes, 2 CV Modes, 1 TIG Mode
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, MIG (GMAW), Pulsed MIG, Multioperator, Advanced Process

Outstanding arc characteristics with both constant current and constant voltage welding processes in a rugged, compact design. Advanced Plug-and-Play control recognition with Amphenol connections for 24V, 42V and 115V wire feeders and 3-pin remote controls.

MX350 Multi-Weld

Top Features

  • Operates with Low DC Arc-Voltage
  • Multioperator Welding from a Single Power Source
  • Drastically Reduces Fuel/Energy Consumption
  • Processes: Stick (SMAW), MIG (GMAW), Multioperator, Air Carbon Arc Cutting, Flux-Cored (FCAW)

Instead of operating with high voltage AC current like a conventional electric welder, the MX350 uses low DC arc-voltage from a constant current electric or engine-driven welding machine, to produce up to 350 amps, DC positive, welding current at 100% duty cycle for stick welding or up to 40 volts of constant voltage power for MIG and flux-cored welding.

EXtreme360 Multioperator Paks

Top Features

  • Available in 4Pak and 8Pak Configurations
  • Built to Red-D-Arc Extreme-Duty Specifications
  • 350 Amps at 60% Duty-Cycle Output
  • Adjustable Arc Control
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Multiprocess, Multioperator, Flux-Cored (FCAW)

These multioperator Paks consist of individual DC inverter-type welders. Each individual welder produces 350 amps at 60% duty cycle for both constant current and constant voltage welding processes. Standard features include Auto-Line, Ammeter and Voltmeter, adjustable Arc Control, full Remote Control capability and Extreme-Duty construction.

FX360XL Multi-Operator Paks

Top Features

  • DC CC CV
  • CrossLinc Technology – Full Functionality Without Control Cables
  • Compatible With LN25 Across-the-Arc and LN25X CrossLinc Feeders
  • Available in 4Pak, 6Pak and 8Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

A rugged, easy to setup and easy to operate multi-process power source for maximum flexibility. CrossLinc technology sends voltage information hundreds of feet using a standard weld cable.

DC400 Multioperator Paks

Top Features

  • Available in 4Pak and 6Pak Configurations
  • Rugged Tubular Pak-Lok-Frame
  • 400 amps DC at 36 volts and 100% Duty Cycle
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multiprocess, Multioperator, Submerged Arc (SAW)

All the flexibility of a single DC400 multiprocess welder, in a multioperator package available in both a 4Pak and 6Pak welding system. Since each welder in the Pak operates independently of the others, any combination of welding processes and electrode polarities can be used.

FX450 Multi-Operator Paks

Top Features

  • Multiprocess Capability
  • Variable Arc Control, Selectable Hot Start
  • Bright Digital Amp and Volt Meters – Easy to Monitor Even in Sunlight
  • Available in 4Pak and 6Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multiprocess, Air Carbon Arc Cutting, Flux-Cored (FCAW)

The FX450 is much lighter, smaller and takes up less floor space than a conventional multiprocess machine. The durable case has an IP23 enclosure rating which ensures it can withstand extreme field environments. This model is also Desert Duty Rated for extreme temperature operation up to 131° F (55° C).

E500 Multioperator Paks

Top Features

  • Modular Pak Construction
  • DP120 Power Distribution Panel Included
  • High Amperage Stick Welding
  • Air Carbon Arc Gouging
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multioperator, Air Carbon Arc Cutting, Flux-Cored (FCAW)

All the benefits of the E300 Multioperator Pak System but with up to 625 amps DC from each module. Each module has its own arc force control, potentiometer-type continuous output control and remote control receptacle. Operates with either 460 VAC or 575 VAC three-phase electrical input. Can be configured as either a 4Pak or 6Pak Multioperator System.

DC600 Multioperator Paks

Top Features

  • Available in 4Pak and 6Pak Configurations
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Full Range Output Control, Standard Ammeter and Voltmeter
  • 600 amps DC at 44 volts and 100% Duty Cycle
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Multiprocess, Multioperator, Submerged Arc (SAW)

All the power of a single DC600 multiprocess welder, in a multioperator package available in both a 4Pak and 6Pak welding system. Features both 42 VAC and 115 VAC auxiliary power for operating a wide range of wire feeders and tractors.

FX650 Multi-Operator Paks

Top Features

  • DC CC CV
  • Voltage Reduction Device – Reduces OCV When Not Welding
  • 15/20A GFCI 115V, 15A Auxiliary Power
  • Welding Outputs are Rated for Extreme Temperature Operation
  • Available in 4Pak, 6Pak and 8Pak Configurations
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW)

The FX650 is a multi-process welder that is easy to set up and easy to operate, but rugged and versatile enough for construction, fabrication, shipbuilding and other heavy-duty applications.

LN7, LN7 GMA Wire Feeders

Top Features

  • Semiautomatic, Constant Speed Wire Feeders
  • Positive Feeding and Quick Reloading
  • Digital Meter
  • Processes: MIG (GMAW), Submerged Arc (SAW), Wirefeeders, Flux-Cored (FCAW)

The LN7 and LN7 GMA are semiautomatic constant speed wire feeders that can be used with a variety of Lincoln engine drives, DC or CV power sources in a shop or field environment.

LN9, LN9 GMA Wire Feeders

Top Features

  • Semiautomatic, Constant Speed Wire Feeders
  • Lockable Control Panel Cover
  • Digital Meter
  • Processes: MIG (GMAW), Submerged Arc (SAW), Wirefeeders, Flux-Cored (FCAW)

The LN9 is designed for flux-cored wire without gas (Innershield®) and submerged arc welding, while the LN-9 GMA is designed for MIG and flux-cored wire with gas (Outershield®).

LN15 Wire Feeder

Top Features

  • Portable, Semiautomatic Wire Feeder
  • Lightweight 8″ (203 mm) Diameter Spools
  • Compact and Simple
  • Sturdy Aluminum Roll Cage
  • Processes: MIG (GMAW), Pulsed MIG, Wirefeeders, Flux-Cored (FCAW) , Surface Tension Transfer

The LN15 is one of the smallest and most maneuverable wire feeders for the construction, shipbuilding and pipeline industries. It uses a high temperature, abrasion resistant plastic case, aluminum alloy roll cage and fully encapsulated PC boards.

LN25 Portable Wire Feeder

Top Features

  • Control Cable Not Required
  • Operates off Welder Arc Voltage
  • Maximum Versatility and Portability
  • Use with CV and CC DC Power Sources

The LN25 portable wire feeder operates off arc voltage with a voltage sensing control circuit so a control cable is not required. To operate, simply connect the welding cable from the power source, attach the work clip and you’re ready to weld.

LN25 ProExtreme Wire Feeder

Top Features

  • Portable Industrial Feeder
  • Digital Meters
  • Includes Gas Solenoid, Flow Meters
  • Extreme-Duty Specifications
  • Processes: MIG (GMAW), Pulsed MIG, Wirefeeders, Flux-Cored (FCAW)

Built upon the tradition and success of the LN25, the new LN25 ProExtreme is designed to be simple, reliable and easy to service. The LN25 ProExtreme is ideal for field construction and fabrication, shipyards, and rental companies.

LN25X Wire Feeder w/CrossLinc

Top Features

  • CrossLinc Technology – Remotely Control Preset Voltage Without a Control Cable
  • Maxtrac Wire Drive System for Reliable Feeding and Easy Changeovers
  • Trigger Interlock Switch for Comfort Over Long Welds
  • Processes: MIG (GMAW), Flux-Cored (FCAW)

The LN25X wire feeder is designed to be simple, reliable and durable. CrossLinc Technology sends voltage information hundreds of feet using a standard weld cable, providing full control of your system without the need for control cables.

Suitcase X-treme 12VS

Top Features

  • Voltage from CV or CC Welders
  • Thermal Overload Protection
  • Double Filtered Gas Valve
  • Polypropylene Case

Suitcase X-treme 12VS provides wire feed speed that is accurate and consistent from the start of the weld to the finish, and from one weld to the next. The best low-end CC arc in the industry.

12VS Extreme-Duty Wire Feeder

Top Features

  • Control Cable Not Required
  • Operates on Arc Voltage and Open Circuit
  • Voltage from CV or CC Welders
  • Voltage-Sensing Control Circuit with CC/CV Switch
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

New polypropylene case with built-in side rails and the ability to open the door to change wire with feeder in vertical position. Digital meters with SunVision technology are standard for voltage and wire speed, and can also display amperage if desired.

LF72, LF74 Industrial Wire Feeders

Top Features

  • LF72 2-Roll and LF74 4-Roll Models Available
  • Wire Size Range – Solid Wire .023 – 1/16″, Cored Wire .030 – 5/64″
  • MAXTRAC Heavy-Duty Cast Aluminum Wire Drive System
  • Processes: MIG (GMAW), Pulsed MIG, Wirefeeders, Flux-Cored (FCAW)

Designed for MIG and cored wire welding in job shop and manufacturing environments, the rugged LF-72 and LF-74 wire feeders are built to deliver reliable performance day after day.

Miller 74S, 74D Wire Feeders

Top Features

  • Heavy Industrial Applications
  • Wire Speed: 50 –780 IPM
  • Trigger Hold, Automatic Run-In and Tool-Less Rotatable Drive
  • Single and Dual Wire Versions Available
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

Suited for heavy industrial applications including heavy manufacturing, metal fabrication, construction and light manufacturing. Single and dual wire versions of the 74S (standard, basic design) and the 74D (digital meters) are available.

Miller 74 MPa Plus Wire Feeder

Top Features

  • Heavy Industrial Applications
  • Wire Speed: 50 –780 IPM
  • Trigger Hold, Automatic Run-In and Tool-Less Rotatable Drive
  • Single and Dual Wire Versions Available
  • Processes: MIG (GMAW), Pulsed MIG, Flux-Cored (FCAW)

Suited for heavy industrial applications including heavy manufacturing, metal fabrication, construction and light manufacturing. Single and dual wire versions of the 74S (standard, basic design) and the 74D (digital meters) are available.

Activ8 Wire Feeder

Top Features

  • Smallest, Lightest Construction Wire Feeder Available
  • 50 – 800 IPM Wire Feed Speed
  • Across-The-Arc Operation (Voltage Sensing)

Activate your shipbuilding, offshore, construction or pipe welding operations with the Activ8 portable wire feeder. Small enough to fit through ship manways and light enough to carry around the site

Millermatic 180

Top Features

  • All-in-one Wire Welding Package
  • Welds 24 Gauge – 5/16 in Mild Steel
  • Auto-Set™ Technology
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

The Millermatic 180 features Auto-Set™, a breakthrough control that automatically sets your welder to the proper parameters. Welds the thickest material in its class, with the highest output in its class. Weld up to 5/16 inch in a single pass.

Lincoln Power MIG 180C

Top Features

  • Combination Wire Feeder/MIG, Flux-Cored Welder
  • 30 – 180 Amp Welding Range
  • Welds Up to 3/16″ with MIG, 1/2″ Flux-Cored
  • Welds Steel, Stainless Steel or Aluminum
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

The Power MIG 180C is a portable wire welder designed for use with industrial 230 volt input power, so you can weld on thicker material — up to 3/16″ with MIG welding and 1/2″ with gas-less flux-cored welding.

Millermatic 251

Top Features

  • Welding Range 30 to 300 Amps
  • Solid Steel, Stainless Steel and Flux-Cored Welding
  • .023 – .045″ Solid MIG, .035″ Flux-Cored Wires
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

The Millermatic 251 is capable of welding materials from 22 gauge up to 1/2 in thick in a single pass. Active Arc Stabilizer technology provides excellent starts and line voltage compensation provides constant output with fluctuations in input power.

Millermatic 252

Top Features

  • Push-Pull Gun Direct Connect – No Extra Module Required
  • Features No-Tool, Quick-Change Reversible Drive Rolls
  • Active Arc Stabilizer Technology
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

The Millermatic 252 offers the highest output in its class (250 A at 28 VDC) letting you weld longer on high-end applications. Active Arc Stabilizer technology provides excellent starts and line voltage compensation provides constant output with fluctuations in input power.

Power MIG 255C

Top Features

  • Diamond Core Technology Delivers a Wide Voltage Sweet Spot
  • 115V Auxiliary Receptacle
  • Digital Meters
  • Processes: MIG (GMAW), Wirefeeders, Flux-Cored (FCAW)

The Power MIG 255C sets the standard for MIG and flux-cored welding in industrial production, job shop fabrication, maintenance or repair work. Diamond Core Technology delivers a wide voltage sweet spot across the welding range, low spatter levels and a forgiving arc on steel, stainless and aluminum – even for demanding out-of-position work.

Millermatic 350P

Top Features

  • Built-in Pulsed MIG Programs
  • Single or Three-Phase Input Power with Line Voltage Compensation
  • Aluminum Pulse Hot Start
  • Processes: MIG (GMAW), Pulsed MIG, Flux-Cored (FCAW)

Single or three-phase power Millermatic capable of welding materials from 22 gauge to 1/2″ thick in a single pass. Perfect for fabrication, manufacturing, maintenance and repair.

EX360, LN25 PRO / S74 MIG Package

Top Features

  • Multi-Process MIG Package
  • DC CC CV
  • 350 Amps at 60% Duty-Cycle Output
  • Bench or Suitcase Wire Feeder Options
  • Processes: MIG (GMAW), Pulsed MIG, Flux-Cored (FCAW)

Heavy-industrial multi-process MIG package, complete with EX360 multi-process welder, LN25 PRO wire feeder (outdoor and portable applications) or the S74 wire feeder (indoor and stationary applications), cart, MIG gun, flow meter, gas hose, welding cable and ground clamp.

FX360XL / FX650XL, LN25X MIG Package

Top Features

  • Multi-Process MIG Package
  • DC CC CV
  • CrossLinc Technology – Remotely Control Preset Voltage Without a Control Cable
  • FX360XL or FX650XL Power Source Options
  • Available in 4Pak, 6Pak and 8Pak Configurations
  • Processes: MIG (GMAW), Flux-Cored (FCAW)

A rugged, easy to setup and easy to operate multi-process MIG package featuring the latest technology from Lincoln Electric. CrossLinc technology sends voltage information hundreds of feet using a standard weld cable.

Spoolmatic 30A Spool Gun

Top Features

  • Uses 1 Pound Wire Spools
  • For .023″ thru 1/16″ Wire Sizes
  • Light and Heavy Industrial Applications
  • Processes: MIG (GMAW)

Industrial, well-balanced Spoolmatic 30A spool gun features a built-in gas valve, rotatable canister, all-wire dual groove drive roll and 15 ft (15A) or 30 ft (30A) cable reach. New barrels are Roughneck and Bernard Centerfire compatible.

XR-Aluma-Pro Push-Pull Gun

Top Features

  • Air or Water-Cooled Versions Available
  • Highest Duty Cycle Rating in its Class
  • Dual Wire Tension Settings for 4000 or 5000 Series Aluminum
  • Processes: MIG (GMAW), Pulsed MIG

The most reliable line of push-pull welding guns. The XR-Aluma-Pro gun is available in air- or water-cooled versions with 15 or 25-foot (4.6 or 7.6 m) cable lengths. The robust, professional-grade gun has the highest duty cycle rating in its class.

XR-Control, XR-Edge Gun

Top Features

  • Air-Cooled and Water-Cooled Gun Versions
  • Master/Gun Wire Feed Speed Control
  • Digital Display
  • Processes: MIG (GMAW)

The XR push-pull wire feed systems offer the choice of air- or water-cooled MIG guns for truly customized systems for particular applications. Standard digital wire feed speed and volt meters provide easy indication and control of weld parameters.

Millermatic 350P Aluminum Push-Pull Gun System

Top Features

  • Superior Aluminum MIG Welding Performance
  • Synergic MIG and Synergic Pulsed MIG
  • Direct Connection for Miller 10-pin XR-Aluma-Pro and XR Pistol Grip Air-cooled Push-Pull Guns
  • Processes: MIG (GMAW), Pulsed MIG

First single- or three-phase power Millermatic that’s optimized to weld aluminum. Perfect for fabrication, manufacturing, maintenance and repair.

AlumaFeed Synergic Aluminum Welding System

Top Features

  • Synergic Pulsed MIG Aluminum Welding
  • Profile Pulse – TIG Appearance with MIG Simplicity and Productivity
  • Ultra-Portable and Versatile
  • Processes: MIG (GMAW), Pulsed MIG

The XR-AlumaFeed and AlumaPower 350 MPa combine for a synergic system that simplifies and improves MIG and pulsed MIG welding applications for aluminum welding.

Miller XMT 350 MPa

Top Features

  • DC CC CV
  • Built-In Pulse Programs Optimized for Aluminum
  • Profile Pulse – TIG Appearance with MIG Simplicity
  • Auto-Line Input Power Management

The XMT 350 MPa is portable and versatile for applications from jobsites to the factory floor. Built-in pulse programs for manufacturing and fabrication applications that have benefits for standard steels, high-strength steels and aluminum.

Lincoln Power MIG 350MP Push-Pull One-Pak

Top Features

  • Pulse-on-Pulse and Power Mode
  • Push-Pull or Spool Gun Ready
  • Dual Procedure Capable
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Pulsed MIG, Wirefeeders, Flux-Cored (FCAW)

When you need more than just a MIG machine, the Lincoln Power MIG 350MP is the choice for you. Lincoln Chopper Technology delivers many more welding processes, along with high quality welds and increased control over the welding arc.

EXtreme 360 MAP

Top Features

  • DC CC CV
  • Advanced Arc Control
  • SharpArc Provides More Control
  • Stable Arc at Low Arc Lengths
  • Reduced Heat Input

The EX360 MIG Advanced Pulse welder is designed to handle virtually any welding job, including those hard-to-weld alloys found at power generation plants and shipbuilding facilities

LT7 Submerged Arc Tractor

Top Features

  • Self-Propelled Mechanized DC Wire Feeder
  • Track and Trackless Versions
  • Wire Size Range – Solid Wire 3/32 – 3/16″
  • For Flat and Horizontal Submerged-Arc Welds
  • Processes: Submerged Arc (SAW)

The LT7 is a self-propelled mechanized DC wire feeder for submerged arc welding. Perfect in heavy fabrication industries where long welds in the flat and horizontal position are required. May be used with or without an optional track.

NA3S Automatic Wire Feeder

Top Features

  • Wire Size Range – Solid Wire 1/16 – 7/32″, Flux-Cored Wire .035 – 5/32″
  • Constant Current and Constant Voltage DC Power Sources
  • Hot or Cold Starting
  • Processes: MIG (GMAW), Submerged Arc (SAW), Wirefeeders, Flux-Cored (FCAW)

Used for heavy-duty fabrication, the NA3 features solid state controls for precise control of welding procedures – even to the most exacting requirements. Easily adjusted for a wide range of processes, feed speeds, and wire sizes.

NA4 Automatic Wire Feeder

Top Features

  • Wire Size Range – Solid Wire 1/16 – 7/32″
  • Constant Current AC Power Sources
  • Hot or Cold Starting
  • Processes: MIG (GMAW), Submerged Arc (SAW), Wirefeeders, Flux-Cored (FCAW)

Used for heavy-duty fabrication, the NA4 features solid state controls for precise control of welding procedures – even to the most exacting requirements. Easily adjusted for a wide range of processes, feed speeds, and wire sizes.

NA5R Automatic Wire Feeder

Top Features

  • Automatic Wire Feeder
  • Solid Wire Size Range .035 – 7/32″
  • Cored Wire Size Range .045 – 5/32″
  • Processes: Submerged Arc (SAW), Wirefeeders, Flux-Cored (FCAW)

Used for heavy duty fabrication and assembly line production, the NA5 features solid state controls for precise control of welding procedures, striking characteristics, as well as bead and shape.

Wel-Handy Multi

Top Features

  • Three models available
  • Light weight and portable
  • Pulling power of 66 lb (30 kg)
  • No track required, eliminating cost and setup time

The Wel-Handy Multi portable welding carriages are used by a wide range of customers, from one man mobile welding businesses to large shipyards with hundreds of welders.

Miller Maxstar 200 SD

Top Features

  • Provides a Solution for Every User’s Needs: From Simple to Fully Automated
  • Blue Lightning – High Frequency Arc Starter for Non-Contact Arc Initiation
  • Preset Parameters
  • Processes: Stick (SMAW), TIG (GTAW)

Blue Lightning provides more consistent arc starts compared to traditional high frequency arc starters. The 200 SD is more reliable and no maintenance is required on the solid state components. Preset parameters provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.

Miller Dynasty 200

Top Features

  • Powerful, Compact AC/DC Inverter
  • High Frequency Arc Starter
  • Lift-Arc Start
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, Air Carbon Arc Cutting

Maximum flexibility – Miller Electric combines advanced inverter technology with Auto-Line™ technology, offering the most flexible AC/DC TIG/Stick power supply in the welding industry.

Miller Syncrowave 250 DX

Top Features

  • 3 – 310 Amps Welding Range
  • AC Balance Control, Dual Digital Meters
  • Last Procedure Recall
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG

Syncro Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness.

Miller Dynasty 350

Top Features

  • Powerful, Compact AC/DC Inverter
  • High Frequency Arc Starter
  • Lift-Arc Start – starting (AC or DC) without high frequency
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG

Auto-Line Power Management Technology allows for any input voltage hookup (208-575 V) with no manual linking, providing convenience in any job setting and is an ideal solution for dirty or unreliable power.

Miller Syncrowave 350 LX

Top Features

  • 3 – 400 Amps Welding Range
  • AC Balance Control, Dual Digital Meters
  • Last Procedure Recall
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG

Syncro Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness.

Miller Dynasty 400 TIGRunner

Top Features

  • Auto-line Power Management Technology
  • AC and DC TIG Features
  • AC Waveforms
  • Processes: Stick (SMAW), TIG (GTAW), Pulsed TIG, Air Carbon Arc Cutting

Latest technology – powerful, compact AC/DC inverter delivers superior arc performance with total AC arc-shaping capabilities. Auto-Line allows connection to any voltage or frequency in the world while using half the power of a conventional machine.

D550K TIG Welder

Top Features

  • Portable DC CC CV Welder with an added AC output kit
  • Allows for portable heavy aluminum AC TIG welding in the field
  • Add High Frequency Unit and Water Cooler Unit if required
  • Up to 20,000 Watts of Three-Phase 240 VAC Auxiliary Power

The three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to 3/8″ carbons. A simplified control panel with a five position range switch and a fine control potentiometer provides easy process set-up.

Miller Big Blue Air Pak (Deluxe) CC/CV AC/DC 20 kW

Top Features

  • Portable DC CC CV Welding With an Added AC Output Kit
  • Up to 20,000 Watts of Three-Phase 240 VAC Auxiliary Power
  • Allows for Heavy Aluminum AC TIG Welding in the Field
  • Processes: Stick (SMAW), TIG (GTAW), MIG (GMAW), Submerged Arc (SAW), Air Carbon Arc Cutting, Flux-Cored (FCAW) , Stud Welding

Welder/generator/air compressor – One machine that will do it all. Designed and built to be the most reliable high-output system in the world.

Proweld CD-312

Top Features

  • #2 to 5/16″ Stud Welding Capacity
  • Designed and built in the U.S.A. by Nelson Fastening Systems
  • Recessed Control Panel
  • Safety Fault Shut Down
  • Processes: Stud Welding

The CD-312 is a state-of-the-art solid state capacitor discharge stud/pin welder. Its rugged design and user friendly controls makes it simple to set up and use. The extremely short weld time of the capacitor discharge process allows studs to be welded to material as thin as .015″ without burn-through. The unit is capable of welding mild steel, stainless and aluminum studs.

Proweld ARC-1850

Top Features

  • 12 Gauge to 7/8″ Stud Welding Capacity
  • Designed and built in the U.S.A.
  • Constant current output
  • Auto safety shutdown
  • Processes: Stud Welding

The ARC-1850 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units.

Need power? Rent a Red-D-Arc 150 kVA generator to power the Proweld ARC-1850 where jobsite power is not available.

Proweld ARC-3000

Top Features

  • 1/4″ to 1 1/4″ Stud Welding Capacity
  • Designed and Built in the U.S.A. by Nelson
  • Constant Current Output
  • Auto Safety Shutdown
  • Processes: Stud Welding

The ARC-3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units.

Need power? Rent a Red-D-Arc 300 kVA generator to power the Proweld ARC-3000 where jobsite power is not available.

DC400

Top Features

  • Rugged Tubular Pak-Lok-Frame
  • 400 amps DC at 36 volts and 100% Duty Cycle
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Arc Force, Pinch, Continuous Output Control

With true multiprocess capabilities, the DC400 provides outstanding arc characteristics for both constant current and constant voltage applications. Full arc control with MS-style remote control connections. Can also be configured as a 4Pak or 6Pak Multioperator System.

DC600

Top Features

  • Rugged Tubular Pak-Lok-Frame
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Full Range Output Control, Standard Ammeter and Voltmeter
  • 600 amps DC at 44 volts and 100% Duty Cycle

Designed for submerged arc, GMAW (MIG)and FCAW welding and stick and air carbon arc gouging with up to 3/8″ diameter electrodes. Includes standard terminal strip for wire feeders and remote control.

DC1000

Top Features

  • 1000 amps DC at 44 volts and 100% Duty Cycle
  • Rugged Tubular Pak-Lok-Frame
  • Full Range Output Control
  • Standard Ammeter and Voltmeter

Designed for submerged arc welding, and capable of GMAW (MIG), FCAW and stick and air carbon arc gouging with electrodes up to 5/8″ diameter. Standard terminal strip for remote controls and wire feeders.

Power Wave AC/DC 1000

Top Features

  • Digital Communications Technology
  • Waveform Control Submerged Arc Welding
  • Increased Weld Speeds, Higher Quality Welds
  • Single and Multi-Arc Capability

Eliminate downtime with easy polarity switching – no hardware reconfiguration required. Stable and independent arc controls for multiple arc applications. Improved efficiency with cooler operation through patented Coaxial Transformer Technology. Remote process monitoring through ArcLink, Ethernet and DeviceNet communication. Consistent operation over +/- 10% input voltage variation through built-in line voltage compensation and reliable input-voltage connection.

SubArc DC 650 Digital

Top Features

  • 650 A at 44 V, 100% Duty Cycle
  • Digital Process Control Technology
  • Highly Reliable Thyristor Power Regulation
  • Processes: Submerged Arc (SAW), Electroslag (ESW)

The SubArc DC 650 Digital covers most single- and twin-wire applications. This traditional transformer/rectifier power source combines high efficiency with the highest reliability. It also features state-of-the-art digital-control electronics to provide best-in-class welding performance and repeatability.

SubArc DC 1000 Digital

Top Features

  • 1000 A at 44 V, 100% Duty Cycle
  • Digital Process Control Technology
  • Highly Reliable Thyristor Power Regulation
  • Processes: Submerged Arc (SAW), Electroslag (ESW)

The SubArc DC 1000 Digital covers most single- and twin-wire applications. This traditional transformer/rectifier power source combines high efficiency with the highest reliability. It also features state-of-the-art digital-control electronics to provide best-in-class welding performance and repeatability.

SubArc AC/DC 1000 Digital

Top Features

  • 1000 A at 44 V, 100% Duty Cycle
  • Digital Process Control Technology
  • Highly Reliable Thyristor Power Regulation
  • Processes: Submerged Arc (SAW), Electroslag (ESW)

AC welding output enables the SubArc AC/DC to be used in tandem arc welding systems with a DC lead arc and AC trailing arc, or with AC / AC arc combinations. Using multiple arcs increases deposition rate, resulting in shorter welding cycles for very thick weldments without compromising quality.

AC1200

Top Features

  • For Fully-Automatic Welding Applications
  • Submerged-Arc Welding with NA4 Automatic Wirefeeders and LT56 Sub-Arc Tractors
  • Scott connection taps standard for two AC welding heads operated in tandem

A leading power source for submerged arc welding,The AC1200 is a reliable power source that provides consistent, proven performance. With outstanding arc characteristics the AC1200 and is specifically designed for operation with NA4 automatic wire feeders.

Welding Cable
  • Available in a Variety of Amperage Capacities
  • Comes in 50′ and 100′ Lengths
  • Complete with Quick Release Connectors
  • Electrode Holders and Whips are 10′ Long with Connectors
  • Ground Clamps also Connect via Quick Release Connectors
Remote Controls
  • Remote output current/voltage controls are available for both potentiometer type and rheostat type welders
  • All controls require extensions, available in both 50′ and 100′ lengths
  • Potentiometer Type Remote Control – For welding machines with 3-pin ir 14-pin MS-style connections. Available with 350 ohm, 1K ohm, or 10k ohm potentiometers, and with rubber or high impact plastic housings
  • Rheostat Type Remote Control – For remote Fine Current adjustment on Red-D-Arc D300K 3+3 diesel welders and Job Selector (open-circuit voltage) adjustment on Red-D-Arc D503K 5+3HO diesel welders

Tell us what you need

We’ll help you find what’s right for you

920033302 +966 13 363 5476 +966 13 363 5477 Enquiry